Sky + locked in stand by mode
28-07-2007, 18:09
|
#1
|
|
Inactive
Join Date: Jul 2007
Posts: 3
|
Sky + locked in stand by mode
I have just bought a Pioneer 42" plasma tv, when I plugged the Sky + back in, it was locked on stand by, nothing Sky suggested resolved the problem. The 160 box was changed by a Sky engineer and all semed fo be fine. However, after around one hour later, the box went into stand by and it is again locked. Any suggestions? I have heard that there may be a compatibility problem with Pioneer and Sky digital.
|
|
|
|
28-07-2007, 18:11
|
#2
|
|
Eva Longoria Fan
Join Date: Jun 2003
Location: Essex
Age: 36
Services: Sky multiroom (Sky Q)
Sky Fibre Unlimited
Sky Landline
Posts: 8,851
|
Re: Sky + locked in stand by mode
Hi
Turn the mains off at the wall, and the wait for a minute, and then turn it back on, and wait for the box to power up.
|
|
|
|
|
28-07-2007, 18:15
|
#3
|
|
Inactive
Join Date: Jul 2007
Posts: 3
|
Re: Sky + locked in stand by mode
Thanks for your response, tried, no joy.
|
|
|
|
|
28-07-2007, 18:16
|
#4
|
|
Inactive
Join Date: Jun 2003
Location: Cambridge
Posts: 16,760
|
Re: Sky + locked in stand by mode
There's a problem with Pioneer plasmas & Sky HD boxes.
http://www.pioneer.co.uk/uk/content/...statement.html
Don't see why there'd be a problem with a Sky+ box though - the issue relates to HDMI & HDCP.
Have you tried powering the box off & on again at the plug? [Leave it off for a few minutes, then turn it back on at the plug, wait 5 mins at least, then try & take it out of standby].
There have been issues with Sky+ & SkyHD boxes since the "Anytime" update... some people have found the box gets stuck in standby... power cycling normally resolves it, while a temp. fix 'till Sky sort the software issue is to turn off "Anytime". Although if you have a 160 that doesn't have Anytime anyway does it?
EDIT: Ah, OK... you've already tried power cycling. How long did you leave it off, & how long did you wait before trying to take it back out of standby?
|
|
|
|
|
28-07-2007, 18:38
|
#5
|
|
Inactive
Join Date: Jul 2007
Posts: 3
|
Re: Sky + locked in stand by mode
It was off for around 20 minutes and I waited around 10 minutes before switching back on. Nothing, I've even tried the software upgrade from Sky and still no joy. Is the Pioneer the cause?
|
|
|
|
|
28-07-2007, 18:41
|
#6
|
|
Inactive
Join Date: Jun 2003
Location: Cambridge
Posts: 16,760
|
Re: Sky + locked in stand by mode
I don't see how.
The only reported problem with Pioneer plasmas is with SkyHD boxes, due to issues with HDCP (the stupid DRM which HDMI uses).
Sky+ box... no HDMI/HDCP, just normal SCART.
Maybe your Sky box is faulty?
Got another TV you can connect it to to test?
|
|
|
|
|
28-07-2007, 21:42
|
#7
|
|
Inactive
Join Date: Feb 2004
Location: Teesside
Age: 45
Services: 1tb tivo, vhd, 60meg shub2 cablemodem, 1Xphoneline, Virgin mobile contract p
Posts: 1,184
|
Re: Sky + locked in stand by mode
Try powering it up unconnected to a tv.
|
|
|
|
|
28-07-2007, 21:59
|
#8
|
|
Inactive
Join Date: Feb 2007
Location: Nottinghamshire
Services: Sky+HD ,
VM Phone [XL],
VM BB [M]
Posts: 255
|
Re: Sky + locked in stand by mode
As a last resort you could try a factory reset, but you will lose everything on the HD.
(The following is taken from satellites.co.uk)
- Holding Left and Right navigation buttons, switch power on and hold for about 30 seconds until Green play light comes on
- The 'play-light' will then rotate clockwise while the resetting procedure takes place. This may take up to 3 minutes. (this timing could vary if there are no programmes stored in the hard drive)
- It then reverts to 'Standby'
- Leave the machine for 2 minutes while hard drive reformats.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 17:36.
|
Join CF
You are here: 
