23-03-2017, 16:32
|
#1
|
cf.member
Join Date: Feb 2007
Location: Glasgow
Services: Virgin Media Big Kahuna with TiVo
Posts: 52
|
Tech advice on upgrade
I'm not in a big hurry to upgrade to V6, but when I do make the leap, I'll need to change my setup, which currently has:
Roof aerial to splitter, one branch to LG Smart TV, one branch into coax combiner.
Virgin coax into TiVo, HDMI out to LG Smart TV, Scart out to RF modulator. RF/coax out joins in with combiner above to send combined signal to second room (via booster amplifier) where the non-smart TV can see the same thing as the TiVo outputs, by analog tuner, and also tunes digitally to all the Freeview channels.
If I did order a V6, and moved the other TiVo to the second room, would Virgin be prepared to use my (good quality) coax to feed their signal to the TiVo in the second room, where I could use powerline to give it the connection to the router (the other room has hard wired connection to the router in a third room!) and use the multi-room functions that Virgin offer.
If not, I could just upgrade my existing setup, ditch the old TiVo, and as there is no RF out or Scart out from V6, I would need to shell out for either HDMI-via-powerline, or HDMI-via-coax, to feed the V6 output to the second room.
As I said at the start, this isn't really imminent, just pondering options. Any thoughts welcome.
Derek
|
|
|
23-03-2017, 17:40
|
#2
|
Cable Guru
Join Date: Jun 2004
Location: Scotland
Age: 41
Services: Virgin Media Gig1 RFOG, TV360, Stream, GoFibre 1Gb
Posts: 1,049
|
Re: Tech advice on upgrade
Impossible to tell, only way they couldn't use it if it isn't triple shielded cabling which is our standard spec. Anything less then our compression fittings wont work on it. Is there no way to change out the current coax?
__________________
Access Network Innovation @ Liberty Global/Virgin Media
All comments are my own opinion and not a direct expression of LG/VM.
|
|
|
24-03-2017, 18:09
|
#3
|
cf.member
Join Date: Feb 2007
Location: Glasgow
Services: Virgin Media Big Kahuna with TiVo
Posts: 52
|
Re: Tech advice on upgrade
Thanks for the advice. It's ages since the coax was installed (20years?) and is inconvenient to remove/replace. We shall see...
Derek
|
|
|
29-03-2017, 11:26
|
#4
|
cf.member
Join Date: Feb 2007
Location: Glasgow
Services: Virgin Media Big Kahuna with TiVo
Posts: 52
|
Re: Tech advice on upgrade
I've just had a thought. My current setup lets me see the TiVo output in a second room via an RF modulator. My existing coax run might not be up to the triple shielded standard required to relocate the TiVo.
If I had a V6 installed in the same room as the current TiVo, I could just continue using my existing setup to send the old TiVo signal to the second room.
Or would there be a clash between the old TiVo and the V6, being in the same room, including from the use of remote controls?
Derek
|
|
|
29-03-2017, 15:56
|
#5
|
Virgin Media Staff
Join Date: Nov 2006
Location: Manchester
Services: 360 x2, Maxit TV, Sky Sports and Sky Cinema. Gig1
Posts: 17,929
|
Re: Tech advice on upgrade
As long as you could put the V6 out of sight, there wouldn't be a clash.
The V6 remote uses RF to control the V6 box, and normally only outputs a 'standard' remote signal to control a TV. So commands from the V6 remote wouldn't affect the older TiVo.
However the V6 will respond to commands from an older TiVo remote, so if there is line of sight between the older remote and the V6 in addition to the TiVo, you could end up controlling both at the same time.
__________________
I work for Virgin Media but all views are my own.
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 12:46.
|