Quote:
Originally Posted by heero_yuy
It's usually a good plan to jot down the signal levels from the diagnostic pages in the TIVO and hub and recheck them after moving equipment as any reduction of signal outside the specification required by the devices will impact the service. As stated above you MUST use cable that is to/exceed VMs specification: Triple shielded and low loss e.g. Webro HD 100 with good quality connectors and then only short distances.
|
I haven't looked in the diagnostics page on a STB for years, but I believe it doesn't show signal levels. The signal level isn't the be all and end all, the quality is much more important, the signal levels could be out of spec but as long as there are no errors coming through, it should be alright