Cable Forum - View Single Post - B&Q Satellite

Kymmy · 07-08-2012, 19:28

Hi and welcome,

It's been covered many many many times in this thread, but basically the tuning shows the connection between the LNB and the tuner, if you have a sat meter you need to point to one of those peaks and try tuning, if no luck then try another and so on.. If you do get some channels but they're not English then go to Lyngsat.com and see which sat you have by the channels scanned and then go either left (EAST) or right (WEST) until you hit 28.2E

07-08-2012, 19:28	#544
Kymmy Inactive Join Date: Dec 2007 Posts: 18,398	Re: B&Q Satellite - Ross freesat box and dish Hi and welcome, It's been covered many many many times in this thread, but basically the tuning shows the connection between the LNB and the tuner, if you have a sat meter you need to point to one of those peaks and try tuning, if no luck then try another and so on.. If you do get some channels but they're not English then go to Lyngsat.com and see which sat you have by the channels scanned and then go either left (EAST) or right (WEST) until you hit 28.2E