View Single Post
Old 11-02-2005, 13:42   #10
SMHarman
Inactive
 
Join Date: Jun 2003
Services: Cablevision
Posts: 8,305
SMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronze
SMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronze
Re: Which modem router for me ?

1. Switch off the PCs switch off the router (well pull the power out the back)
2. Plug router to CM, router to PC1 router to PC2 (make sure you get enough "straight" through (not crossover) patch cables.
3. Turn CM on wait until sync and rdy lights are stable
4. Turn router on wait until lights stabilise, the wan light should blink occasionally as network traffic on the ntl network talks to it.
5. Turn the PCs on.

Open explorer and it should bring up your home page.
No wireless security to configure, easy. Unless you are connected through a STB you do not need to clone the mac address.

Do you want to share files / printers etc between the two PC or just have both access the internet?
SMHarman is offline   Reply With Quote